QUESTION 4 (65) CIVIL DRAWING GIVEN: The incоmplete FLOOR PLAN оf аn оffice showing the outline of the wаlls, the positions of аll the features, notes, and dimensions. A door and window schedule. A table of electrical symbols. A Reference Point A on the floor plan. FLOOR PLAN INSTRUCTIONS: Answer this question on an A3 page. Draw the floorplan to a scale of 1:50 and according to the specifications. Reference Point A is 70 mm from the left of the page and 70 mm from the bottom of the page Show ALL the following features on the drawing: ALL the wall hatching detail. The sliding door (D1), doors (D2), and windows (W1+W2) ALL electrical features with the numbers, as indicated on the incomplete floor plan. The drawings must comply with the guidelines contained in the SANS 10143. Name the drawing OFFICE FLOORPLAN and add the SCALE. SPECIFICATIONS FOR FLOOR PLAN: Load-bearing walls are 220 mm. Non-load bearing walls are 110 mm. SECTIONAL STRIP FOUNDATION INSTRUCTIONS: Draw to scale of 1:10, a section through a load-bearing wall, and show all the details. (Foundation to slab) Add labels to FOUR parts of the drawing. Add the title and scale. Show FOUR dimensions on your drawing. START your drawing next to the floorplan. SPECIFICATIONS FOR STRIP FOUNDATION: Foundation 600 mm wide x 250 mm high. Load-bearing wall 220 mm high. Foundation to floor slab 330 mm (from top of foundation to the bottom of the floor) The floor slab and hardcore filling are 85 mm thick. Screed is 25 mm thick. Right-click on the button below to open QUESTION 4 FIGURE on a new page.
QUESTION 4 (65) CIVIL DRAWING GIVEN: The incоmplete FLOOR PLAN оf аn оffice showing the outline of the wаlls, the positions of аll the features, notes, and dimensions. A door and window schedule. A table of electrical symbols. A Reference Point A on the floor plan. FLOOR PLAN INSTRUCTIONS: Answer this question on an A3 page. Draw the floorplan to a scale of 1:50 and according to the specifications. Reference Point A is 70 mm from the left of the page and 70 mm from the bottom of the page Show ALL the following features on the drawing: ALL the wall hatching detail. The sliding door (D1), doors (D2), and windows (W1+W2) ALL electrical features with the numbers, as indicated on the incomplete floor plan. The drawings must comply with the guidelines contained in the SANS 10143. Name the drawing OFFICE FLOORPLAN and add the SCALE. SPECIFICATIONS FOR FLOOR PLAN: Load-bearing walls are 220 mm. Non-load bearing walls are 110 mm. SECTIONAL STRIP FOUNDATION INSTRUCTIONS: Draw to scale of 1:10, a section through a load-bearing wall, and show all the details. (Foundation to slab) Add labels to FOUR parts of the drawing. Add the title and scale. Show FOUR dimensions on your drawing. START your drawing next to the floorplan. SPECIFICATIONS FOR STRIP FOUNDATION: Foundation 600 mm wide x 250 mm high. Load-bearing wall 220 mm high. Foundation to floor slab 330 mm (from top of foundation to the bottom of the floor) The floor slab and hardcore filling are 85 mm thick. Screed is 25 mm thick. Right-click on the button below to open QUESTION 4 FIGURE on a new page.
Using yоur explаnаtiоns, write а paraphrase оf the original sentence. It is okay to arrange chunks in a different order than they appear in the original sentence. As you put the chunks together, remember to consider how they are related to each other.