Blog

You are working in the emergency room and start collecting a health history on your patient. You ask the patient, “What brought you in today?” and they say, “I…can’t…catch…my…breath.” What should you do next? 

Which condition should be assessed for in a bedridden client with frequent gastrointestinal reflux?

_______ proteins would not span the entire lipid bilayer.

When completing an abdominal exam, in what order should assessment steps be completed?

You are caring for several geriatric clients. Which alterations in health should you attribute to age-related physiologic changes?

I have read and understand the Syllabus Attendance Policy: Due to limited clinical space students may not be able to make-up missed clinical time. If the student is able to make-up clinical time, it will be at the convenience of the faculty member and clinical agency.   If unable to attend clinical, the student must notify the proper instructor prior to the clinical experience as stated in the Medical Assistant Student Handbook. Failure to notify instructor on a clinical day constitutes a “no call no show”. In addition, failure to notify instructor on clinical day will result in a grade of “0” for the clinical day. The “no call-no show” on a clinical day may also be grounds for dismissal.  The student will call the instructor or department office and leave a voice mail as to the reason of the absence and a phone number where they may be reached. Any absence of a clinical day results in a grade of “0” for that clinical day.

Define osmosis.  Please make sure that each of key components of the definition is included.

Please put your answer in the space provided.  The letter only is fine to write. During osmosis through a selectively permeable membrane, a. water moves against (up) its concentration gradient. b. solutes move against (up) their concentration gradient. c. water moves to an area of higher solute concentration. d. water moves to an area of lower solute concentration. e. both a and c are correct. f. both b and d are correct. g. all of those mentioned above (a through d) are correct.

A load of 16 kN is applied through a pin connection and a square bearing plate to the end of a beam that has a rectangular cross section. The base of the beam’s cross section is 72 mm and the height is 180 mm. The size of the bearing plate is 92 mm. Determine the bearing stress between the plate and the beam.

A steel [E = 195 GPa, ν = 0.318] rod with a circular cross section is used as a weight hanger. The straight part of the rod is 160-mm long and has a diameter of 4.7 mm. Determine the longitudinal strain in this portion of the rod when it supports a tensile load of 11.0 N.