Blog

The magnetic bearing of a line is S 17°30’ E. If the magnetic declination is 8°15’ W, what is the true bearing of the line?

A 100-ft steel tape of cross-sectional area 0.0061 in2, weight 2.1 lb, and standardized at 68o F is 99.983 ft between end marks when supported throughout under a 12.0-lb pull. A horizontal distance AB = 196.09 ft was measured in two segments with this tape at 61o F with a tension of 12.0-lb and ends-only support. (It was measured with one full segment of 100.00’ and a second segment of 96.09’.) What is the pull correction for this measurement?

(Questions 1-3 contain identical calibration and measurement information, which will be repeated for each question. The only difference will be in the question at the end.) A 100-ft steel tape of cross-sectional area 0.0061 in2, weight 2.1 lb, and standardized at 68o F is 99.983 ft between end marks when supported throughout under a 12.0-lb pull. A horizontal distance AB = 196.09 ft was measured in two segments with this tape at 61o F with a tension of 12.0-lb and ends-only support. (It was measured with one full segment of 100.00’ and a second segment of 96.09’.) What is the temperature correction for this measurement?

 #9.  You are not required to wear safety glasses at all during this lab.

 #2.  Students are not allowed to clean up broken glass.

 #3.  Long pants, sleeves, closed toed and closed heeled shoes must be worn while in the lab.

Schumpeter described innovation as consisting of _____________ plus __________.

According to the “What Executives Should Remember” article, Peter Drucker argued that functioning boards are often an advantage of what type of company?

In the specific factors model, which of the following will increase the quantity of labor used in cloth production?

Bonus Question Which of the following is the Recommended Material for this course?