A manual process control system requires an operator to monitor the process and make the required adjustments
Blog
The constants given in the formulas for the conversion of ve…
The constants given in the formulas for the conversion of velocity units to volumetric units are based on the relationship between _______ of the pipe and its cross sectional area
Control loop ___ is the process of ensuring that all loop co…
Control loop ___ is the process of ensuring that all loop components are properly selected and configured to minimize variabilities
The SP, deviation of the SP from the PV, and ____________ ar…
The SP, deviation of the SP from the PV, and ____________ are common parameters
The instrument most often used as a current source is a
The instrument most often used as a current source is a
On many I/P converters, adjusting a potentiometer sets the z…
On many I/P converters, adjusting a potentiometer sets the zero and span.
If the span of an instrument is 50 °C and the instrument res…
If the span of an instrument is 50 °C and the instrument resolution is 100 points, what is the resolution in measurement parameters?
The most common automatic control method used in flow contro…
The most common automatic control method used in flow control systems is _________ control
During the ______________ test, the controller checks the ra…
During the ______________ test, the controller checks the random access memory to ensure it is operating properly
The four major components of an electron ic controller inclu…
The four major components of an electron ic controller include the disply panel, the control panel, the _________, and the connection terminal