Blog

Figure 8-1 Based on the accompanying figure, describe how the additional button is added to the circuit.

Push button type manual starters are ____________________, not fractional, horsepower starters.

____________________ are designed to produce an output voltage or current that is dependent on the amount of pressure being sensed.

A selector switch is used to break the connection to the holding contacts.

Why is it important to collect Blood Cultures before Antibiotics are administered in a patient?

When a component is used to perform the function of start it is generally connected in ____________________ with the existing START button.

The ____________________ is the most common heat sensing device used in the production of room thermostats and thermometers.

Figure 7-2 In the accompanying figure, when the START button is pressed, current flows through the _____coil.

Most reversing controllers only contain mechanical interlocks.

In a schematic, any contact that is marked with the same letter or number as a coil is controlled by that coil regardless of where it is located in the schematic.