Blog

____________________ show components in their electrical sequence without regard for physical location.

Some common causes of motor overloads are bad ____________________ in either the motor or the load the motor operates.

All solenoids that operate on alternating current must have a(n) ____________________ coil.

What is the voltage on which most magnetic control systems operate?

Solder melting type overloads are often called solder ____________________ overloads.

Contactors are equipped with contacts intended to connect high current loads to the power line; these large contacts are called ____________________ contacts.

The double acting push button has two terminal screws.

The conductor size, fuse or circuit breaker size, and overload size are generally determined using the ____________________ Code® and/or local codes.

Some motors can draw up to 600 percent of rated full load current during starting.

Fuses and circuit breakers are generally employed for ____________________ protection.