Identify the structure labeled F.
Blog
Calculate the inspiratory to expiratory (I:E) ratio when the…
Calculate the inspiratory to expiratory (I:E) ratio when the inspiratory time is 0.5 second and the respiratory rate is 30 breaths/min.
What thin membrane, continuous with the epiblast layer, secr…
What thin membrane, continuous with the epiblast layer, secretes fluid to bathe the embryo?
Identify the white blood cell labeled B.
Identify the white blood cell labeled B.
Identify the urinary structure labeled C.
Identify the urinary structure labeled C.
Mrs. Ingalls presented to the ER unresponsive and in cardiac…
Mrs. Ingalls presented to the ER unresponsive and in cardiac arrest. She is resuscitated and is currently being bagged via her ETT tube. What mode of ventilation should you recommend for Mrs. Ingalls?
A 45-year-old, 73-inch-tall, 200 lb male patient is admitted…
A 45-year-old, 73-inch-tall, 200 lb male patient is admitted to the emergency department with an exacerbation of myasthenia gravis. The respiratory therapist assesses the patient and finds the patient’s maximum inspiratory pressure is -15 cm H2O and his vital capacity is 1050 mL. It is decided that the patient requires ventilatory support. The most appropriate ventilator settings for this patient are which of the following?
A hemodynamically unstable patient being ventilated in VC-C…
A hemodynamically unstable patient being ventilated in VC-CMV mode is triggering inspiration at a rate of 25. His ABG results are as followed: ABG: pH 7.50 PCO2 30 PO2 98 HCO3 24 Sa02 100% What should you recommend?
What fractional inspired oxygen (FIO2) setting should be set…
What fractional inspired oxygen (FIO2) setting should be set on the ventilator when the patient currently has a partial pressure of oxygen (PaO2) of 53 mm Hg while receiving 50% oxygen and the desired PaO2 is 90 mm Hg?
Which of the following will increase the volume delivered to…
Which of the following will increase the volume delivered to a patient on a pressure limited ventilator? l. Decreasing the sensitivity ll. Increasing the flow setting lll. Decreasing the flow setting lV. Increasing the pressure setting