Blog

For the given circuit, what is the current through the resistor R? The current should be reported in mA to two decimal places.

Consider the two-resistor voltage divider circuit shown. Assuming that turning the knob of the potentiometer clockwise increases R2, approximately at what position should the wiper be set to yield an output voltage (Vout) of 10.85 V if voltage Vin = 30 V?

The circuit below is a low-pass filter.

The gains of the following inverting summer are -1, -0.5 and -2 for Vin1, Vin2 and Vin3, respectively.

T/F: A comparator can convert a sine wave to square wave.

Calculate the peak-to-peak value of the output of the circuit shown above with respect to the input generated from FG1+, where

Calculate the peak-to-peak value of the output of the circuit shown above with respect to the input generated from FG1+, where

Suppose you invested in Disney, Pepsi, and Intel.  If your portfolio is allocated with the weights show in the table and the stocks had the following returns in 2020, what was the portfolio return in 2020 (rounded to two decimal places)?   Weight Annual (%) Return 2020 Disney 40% 25% Pepsi 30% 9% Intel 30% -17% Rounded Annual Return from 1stock1.com

A bus on your breadboard is left completely unconnected. If you measure the voltage from this bus to GND, what will you most likely see on the DMM? Pick the most correct answer.

In the comparator pictured below: +Vs = 15V -Vs = -10V V+ = -5V V- = 2V What is the value of Vout?