Blog

The nurse is teaching a client who was recently diagnosed with thrombocytopenia.  Which instruction does the nurse include in this client’s discharge teaching?

A 0.93 in. x 11.2 in. plate is connected to a gusset with eight 1/2 in. bolts. Standard sizing is used for the bolt holes. What is the gross area of the plate?

A 0.56 in. x 11.0 in. plate is connected to a gusset with eight 7/8 in. bolts. Standard sizing is used for the bolt holes. What is the gross area of the plate?

Members exposed to bending and axial load are called _______.

When working on the design of a new structure, the first priority of a structural engineer is _______.

A 3/8 in. x 11 in. plate must resist a service dead load of 58 kips and a service live load of 54 kips in tension. The plate is connected to a gusset with eight 1 in. bolts. Standard sizing is used for the bolt holes. The steel is ASTM A36: Fy = 36 ksi, Fu = 58 ksi. Assume that Ae = An. Using ASD, does the plate have enough strength?

The symbol W represents _______.

LRFD load combinations 6 and 7 (0.9D + 1.0W; 0.9D + 1.0E) account for the possibility of dead load and wind or earthquake load counteracting each other.

A tensile test was performed on a specimen with a circular cross section. The diameter was measured to be 1.050 inch. Two marks were made along the length of the specimen and were measured to be 2.900 inches apart. This distance is defined as the gage length, and all length measurements were made between the two marks. The specimen was loaded to failure. Fracture occurred at a load of 26,000 pounds. The specimen was then reassembled, and the diameter and gage length were measured to be 0.599 inch and 3.212 inches. Determine the reduction in cross-sectional area as a percentage.

You are making a home visit to a client receiving external radiation therapy. Which of the following observations would indicate a need for further teaching?