Blog

Solve:        (2.34 x 104 ) x (1.38 x 107)

LRFD load combinations 6 and 7 (0.9D + 1.0W; 0.9D + 1.0E) account for the possibility of wind load and earthquake load counteracting each other.

Solve for C2: 15.5 mL     x      2.00 M        =        150. mL       X          C2

The first nine editions of the Steel Construction Manual and the accompanying specification were based on _______?

Calculate [45.3 – 25.2].  You may use your calculator.

A beam is part of the framing system for the floor of an office building. The floor is subjected to both dead loads and live loads. The maximum moment caused by the service dead load is 44 ft-kips, and the maximum moment for the service live load is 48 ft-kips (these moments occur at the same location on the beam and can therefore be combined). If ASD is used, what is the required nominal strength of the beam for a safety factor Ω of 1.50?

Which manufacturing process produces the largest category of standard cross-sectional shapes?

A tension member must be designed for a service dead load of 49 kips and a service live load of 5 kips. If LRFD is used, determine the maximum factored load (required strength), Ru.

Describe any of the following endocrine glands’ one hormones. Include the following information.The name of the hormone, abbreviation is fine. (.5 points)Function of the hormone. (.5 points)Name the disease caused due to hypo and hypersecretion. (1 point)A. Adrenal glandB. Pituitary glandC. Thyroid glandD. Pancreas 

When calculating the net area of a bolted connection, how much should be added to the hole diameter to account for the damage caused by punching the bolt holes?