Blog

A client converts from normal sinus rhythm at 80 bpm to atrial fibrillation with a ventricular response at 166 bpm. Blood pressure is 162/74 mm Hg. Respiratory rate is 20 breaths per minute with normal chest expansion and clear lungs bilaterally. IV heparin and Diltiazem are given. The nurse caring for the client understands that the main goal of treatment is what?

A patient with respiratory failure has a respiratory rate of 6 breaths/minute and an oxygen saturation (SpO2) of 88% via non-rebreather (NRB) mask. The patient is increasingly lethargic. Which intervention will the nurse anticipate?

The nursing educator is presenting a case study of an adult client who has abnormal ventricular repolarization. This pathologic change would be most evident in what component of the ECG?

Please name 4 manifestions of a tension pneumothorax (2 must be specific, and 2 can be considered for any type of pneumothorax). Good luck!! Total 1 point E.C. available – 0.25 point for each answer.

The nurse is providing care for a client who has recently been diagnosed with COPD. When educating the client about exacerbations, the nurse should prioritize what topic?

Five toy blocks are glued together to form a beam that supports a shear force of 149 N. Each block has dimensions a = 7 mm and b = 21 mm. Determine the horizontal shear stress in the glue between blocks (4) and (5).

The nurse documents the vital signs for a patient admitted 2 days ago with gram-negative sepsis: temperature 101.2° F, blood pressure 90/56 mm Hg, pulse 92, respirations 34. Which action should the nurse take next?

A nurse notes crackles on a client diagnosed with right middle lobe (RML) pneumonia. In which area would the nurse place the stethoscope to assess the adventitious breath sounds associated with this diagnosis?

Three toy blocks are glued together to form a beam that supports a vertical shear force of 97 N. Each block has dimensions a = 9 mm and b = 27 mm. Determine the horizontal shear stress in the glue between blocks (2) and (3). The moment of inertia around the horizontal centroidal axis of the beam is 175,507 mm4.

Loads P = 500 N and Q = 795 N act on an oak beam. Determine the magnitude of the largest shear force (consider both positive and negative values) in the beam. Let a = 0.7 m and b = 1.9 m.