Blog

A load of P = 595 lb is applied to beam ABC. Bar (1) is made of aluminum [E = 10,800 ksi] and has a square cross section with a width of 1.20 in. Determine the magnitude of the change in length of bar (1) due to the load. Let a = 37 in., b = 14 in., and c = 8 in.

A load of P = 415 lb is applied to beam ABC. Determine the normal force in bar (1). Let a = 39 in., b = 13 in., and c = 10 in.

Two pieces of high-density polyethylene [E = 0.94 GPa] tubing are fitted together and firmly clamped at their ends. A load of 107 N is applied to the fitting. Tube (1) is 140 mm long, and tube (2) is 100 mm long. Both tubes have an outsider diameter of 23.0 mm and an inside diameter of 18.4 mm. Determine the load carried by tube (2).

A load of P = 265 lb is applied to beam ABC. Determine the normal force in bar (1). Let a = 37 in., b = 12 in., and c = 8 in.

A steel [E = 205 GPa] rod with a circular cross section is used as a weight hanger. The straight part of the rod is 130 mm long. Determine the minimum diameter D required if this portion of the rod must hold a tensile load of 9.8 N without stretching more than 0.00270 mm.

Patient Information/Signalment – Practice type – General practice/Emergency/other Patient name = what made you choose this patient/case?  species, breed, age, sex, and reproductive status i.e. spayed or castrated Color and markings Tattoo or microchip?

A load of P = 260 lb is applied to beam ABC. Bar (1) has a square cross section with a width of 1.11 in. If the normal stress in bar (1) is limited to 15 ksi, determine the factor of safety for bar (1). Let a = 29 in., b = 13 in., and c = 10 in.

A 3D printed polymer rod measures 167.00 mm in length while on the heated print bed at 57.8°C. After cooling to room temperature at 20.6°C the rod measures 166.61 mm in length. Determine the coefficient of thermal expansion of the polymer.

A load of P = 525 lb is applied to beam ABC. Bar (1) is made of aluminum [E = 10,400 ksi] and has a square cross section with a width of 0.86 in. Determine the magnitude of the change in length of bar (1) due to the load. Let a = 31 in., b = 14 in., and c = 8 in.

A load of P = 245 lb is applied to beam ABC. Determine the normal force in bar (1). Let a = 37 in., b = 13 in., and c = 9 in.