Blog

If a grid has an interspace of 0.5mm and lead strips that are 3mm high, what is the grid ratio?

What is defined as the oppropriate distance from the focal spot of the X-ray tube to the grid with how the grid lines match the diverging beam?

T/F: Half-value layer (HVL) is a means in which the degree of penetration of an x-ray beam is measured.

For a particular set kVp, which type of the following x-ray equipment produces the very highest average kV for the x-ray beam:

Compared to a 3-phase 6-pulse x-ray machine, a 3-phase 12-pulse unit is:

The original radiograph was taken with a 8:1 ratio grid at 10 mAs and 80 kVp.  The repeat radiograph is taken with a 12:1 ratio grid.  What new mAs is required?

The original radiograph was taken with a 5:1 ratio grid at 8 mAs and 70 kVp.  The repeat radiograph is taken with no grid.  What new mAs is required?

T/F: Compression paddles can be used to reduce part thickness.

Within the signal of the remnant radiation beam, scattered radiation can destroy:

When using a wedge-shaped compensating filter, the tech should always place the thicker portion of the filter: