A resilient type motor is electrically isolated from the metal frame; therefore it is imperative that the ground wire be properly connected to the frame to prevent possible electrocution in case of a short to case.
Blog
Unit and wall heaters are typically mounted on the ceiling o…
Unit and wall heaters are typically mounted on the ceiling or wall and use a fan to distribute the heat by forced convection. They are controlled by a low volt thermostat.
The ____________ was the forced removal of the Cherokee peop…
The ____________ was the forced removal of the Cherokee people from their homes in the South to Oklahoma. It is believed that more than a quarter of the Cherokee population died on the journey.
Name the structure at the tip of the arrow. tapetum lucidum….
Name the structure at the tip of the arrow. tapetum lucidum.JPG [BLANK-1]
Name the structure at the tip of the arrow. perpendicular pl…
Name the structure at the tip of the arrow. perpendicular plate.jpg [BLANK-1]
The indoor fan on an oil furnace is controlled by:
The indoor fan on an oil furnace is controlled by:
Open-source data mining tools include applications such as I…
Open-source data mining tools include applications such as IBM SPSS Modeler and Dell Statistica.
When larger motor loads require larger contactors because of…
When larger motor loads require larger contactors because of their larger current requirements, which additional component must be used for control?
Outdoor combustion air shall be provided through openings to…
Outdoor combustion air shall be provided through openings to the outdoors of not less than 3 inches.
The fusible link on an electric furnace heating circuit is d…
The fusible link on an electric furnace heating circuit is designed to open on a temperature higher than the normal operating temperature. If this link is found to be open it is likely that the high limit switch has failed.