__?__ is an area of depression of the face or root of a weld where the filler metal did not completely fill the weld groove, so it is at least level with the surface of the pipe.
Author: Anonymous
What are some other terms weldiing manufacturers use for Arc…
What are some other terms weldiing manufacturers use for Arc Force?
Because of the low amount of ultraviolet light present, it…
Because of the low amount of ultraviolet light present, it is not necessary to use shaded lenses when oxy-fuel cutting.
Label the following diagram: grp002-1.jpg A. _____________…
Label the following diagram: grp002-1.jpg A. _____________ [BLANK-1]
Before welding can be done on a structure, the procedure tha…
Before welding can be done on a structure, the procedure that will be used must be ____.
An ultrasonic examination can locate and indicate the size o…
An ultrasonic examination can locate and indicate the size of a flaw.
Check all apply: Reasons why a groove weld with a wide groov…
Check all apply: Reasons why a groove weld with a wide groove angle can cost more:
The purpose of a copper coating on the carbon electrode is t…
The purpose of a copper coating on the carbon electrode is to increase the conductivity of the electrode.
When you start the cover pass, the number of stringer beads…
When you start the cover pass, the number of stringer beads required and the width across the top of the groove opening will determine the size of the electrode that you will use.
A __?__ is an angled surface edge preparation that is placed…
A __?__ is an angled surface edge preparation that is placed at the end of the weld joint.