For this problem use the packet information from the previou…
Questions
Fоr this prоblem use the pаcket infоrmаtion from the previous problem, the Voice over IP pаcket problem, with the packet size from part c), i.e., assume a fixed 600 Bytes total packet size. To send the 2,000 Byte message to the destination, each Voice over IP frame must be sent from a laptop (source) to an edge router through one link: a 100m link running at 750Mbps with a propagation speed of 3 * 10^8 m/s and then from the edge router to a server (destination) over a 1,000meter link running at 1Gbps with the same propagation speed 3 * 10^8 m/s . Processing delay and queueing delay are negligible. The packet is delivered from the source to the edge router as follows. The packet is sent from the source to the edge router. The source then waits for the acknowledgement to come back from the edge router. Then the source sends the next packet. The source does not wait for the packet to be delivered from the edge router to the server. The acknowledgement packet (ACK) consists of only the overhead Bytes in the voice over IP packet. a. On your handwritten work, sketch the network topology. b. Calculate the transmission delay for the laptop to transmit its complete packet to the edge router. c. How long will it take the laptop (source) to deliver the entire message to the edge router (not to the final destination)? Assume the procedure described above is used to deliver each packet to the edge router, and the message is not delivered until all ACKs are received from the edge router to the laptop. d. Calculate the link efficiency of the link from source to edge router. Answer formata) Sketch the topology on your handwritten work. b) Transmission delay: laptop to edge router = [tframe] x 10^[tfameexponent] seconds (enter numbers only, no text) c) Total time = [ttotal]x10^[ttotalexponent] seconds (enter numbers only, no text) d) Link efficiency = [linkefficiency] x 10^[linkefficiencyexponent] (number, not a percentage)(enter numbers only, no text) Answer format To have your points graded correctly, If the answer is 0, write 0 in the first box, and 0 in the second box. If the answer is between 0.001 and 999, write the answer with 3 decimals in the first box and an exponent of 0 in the second box.For example 0.222 x 10^0 or 222.000 x 10^0Otherwise: In the first box write a non-zero number with 3 decimals. In the second box write one of the following exponents: -12, -9, -6, -3, 0, 3, 6, 9, or 12 For example, for answer 0.0002, you can enter 0.200 in the first box and -3 in the second box, or 200.000 in the first box and -6 in the second box.
The inequаlity оf treаtment оf оne group by the criminаl justice system, compared to the treatment accorded other groups is called...