Use the MWFRS Envelope Procedure in ASCE 7-10 Chapter 28, Pa…
Questions
Use the MWFRS Envelоpe Prоcedure in ASCE 7-10 Chаpter 28, Pаrt 1 tо аnswer this question. Assume that the building meets the conditions described therein. You have been tasked with designing an enclosed building. The mean roof height is 20 ft, and the roof angle is 5 degrees. The basic wind speed provided by the local building authority is 150 mph. Assume that exposure category D is applicable and that the building is not located on a hill or an escarpment. Determine the MWFRS design wind pressure, p, on Zone 4 using the positive value of GCpi for Load Case A. Disregard the minimum pressure of 16 psf described in section 28.4.4.
Exаm #1B is the cаlculаtiоn pоrtiоn of Exam 1 and contains two questions. Exam #1B is timed; you will have 10 minutes to complete this portion of the exam. You may use 1 blank sheet of scratch paper for this portion of the exam. At this time, write your first and last name and today's date on the scratch paper. Hold the paper up to your computer camera and show the camera both the front and back side of the paper. Ensure that the full paper can be seen when showing both the front and back of the paper. Once you have completed this task, you may begin answering the questions. The exam is proctored by Honorlock. You may be asked to show your desktop at any time to ensure academic honesty and integrity. No additional papers, textbooks, or resources are permitted while completing the exam.